• 欢迎加入EmulatedLab主群:593920308,EmulatedLab②群:178989902!
  • 如果您喜欢本站,那么赶紧按Ctrl+D收藏EmulatedLab吧!

GNS3上实现IPv6的HSRP配置

GNS3 Maosen | 森 3年前 (2017-07-26) 4699次浏览 1个评论 扫描二维码
文章目录[隐藏]

IPv6的HSRP配置

GNS3上实现IPv6的HSRP配置

R1#sh run int f0/0

interface FastEthernet0/0

mac-address 0011.1111.1111

ipv6 address 2001:DB8:1212::1/64

standby version 2

standby 1 ipv6 autoconfig

standby 1 priority 200

standby 1 preempt

standby 1 track Serial0/0

 

R2#sh run int f0/0

interface FastEthernet0/0

mac-address 0022.2222.2222

ipv6 address 2001:DB8:1212::2/64

standby version 2

standby 1 ipv6 autoconfig

standby 1 preempt

standby 1 track Serial0/1

 

R1#sh standby

FastEthernet0/0 – Group 1 (version 2)

State is Active

7 state changes, last state change 00:02:15

Virtual IP address is FE80::5:73FF:FEA0:1

Active virtual MAC address is 0005.73a0.0001

Local virtual MAC address is 0005.73a0.0001 (v2 IPv6 default)

Hello time 3 sec, hold time 10 sec

Next hello sent in 2.432 secs

Preemption enabled

Active router is local

Standby router is FE80::222:22FF:FE22:2222, priority 100 (expires in 7.388 sec)

Priority 200 (configured 200)

Track interface Serial0/0 state Up decrement 10

Group name is “hsrp-Fa0/0-1″ (default)

 

R2#sh standby

FastEthernet0/0 – Group 1 (version 2)

State is Standby

7 state changes, last state change 00:02:27

Virtual IP address is FE80::5:73FF:FEA0:1

Active virtual MAC address is 0005.73a0.0001

Local virtual MAC address is 0005.73a0.0001 (v2 IPv6 default)

Hello time 3 sec, hold time 10 sec

Next hello sent in 2.008 secs

Preemption enabled

Active router is FE80::211:11FF:FE11:1111, priority 200 (expires in 8.060 sec)

MAC address is 0011.1111.1111

Standby router is local

Priority 100 (default 100)

Track interface Serial0/1 state Up decrement 10

Group name is “hsrp-Fa0/0-1″ (default)


如未注明,均为原创,版权归EmulatedLab所有!转载请注明出处,否则追究法律责任!
喜欢 (2)
[sms1107]
分享 (0)
Maosen | 森
关于作者:
真正的强者从不畏惧别人比你更强!

您必须 登录 才能发表评论!

(1)个小伙伴在吐槽